Preparation of Nanoporous PdIrZn Alloy Catalyst by Dissolving Excess ZnO for Cathode of High- Temperature Polymer Electrolyte Membrane Fuel Cells

Abstract

Carbon-supported nanoporous palladium-iridium-zinc (NP-PdIrZn) electrocatalyst was prepared through the modification of the alcohol-reduction process following the selective dissolution of excess ZnO nanoparticles using NaOH solution. The electrocatalyst was applied successfully to the cathode for a high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC). X-ray diffraction (XRD) patterns of the NP-PdIrZn nanoparticles suggests formation of the ternary alloy and complete removal of ZnO without the formation of individual Pd, Ir, or Zn nanoparticles. Moreover, transmission electron microscopy (TEM) images displayed porous nanoparticles with an irregular shape, which was generated by removing the ZnO from the PdIrZn-ZnO nanocomposites, and was prepared by using the excessive Zn precursor. The electrochemical surface area (ECSA) of the NP-PdIrZn catalysts was estimated by cyclic voltammetry using a rotating disk electrode method , and the oxygen reduction reaction (ORR) activity was evaluated by a linear sweep method. The NP-PdIrZn catalysts showed larger ECSA and higher ORR activity than those of the PdIr and PdIrZn catalysts, which may be attributed to the increased exposed surface area by selective etching of the ZnO in the composites. Furthermore, the NP-PdIrZn catalyst exhibited excellent performance (0.66 V) in a single cell under the HT-PEMFC condition than those of the PdIr (0.58 V) and PdIrZn (0.62 V) catalysts, indicating that geometric and electronic control of Pd-based alloy can improve the single-cell performance for the HT-PEMFC. © 2019 by the authors.